Sonics VCX750 User Manual download pdf (Page 6)

SECTION I – INSTALLATION

INSPECTION

Prior to installing the Ultrasonic Processor, perform a visual inspection to detect any

evidence of damage which might have occurred during shipment. Before disposing of

any packaging material, check it carefully for small items.

The equipment was thoroughly inspected and carefully packed before leaving our

factory. The carrier, upon acceptance of the shipment, assumed responsibility for its

safe delivery. Claims for loss or damage sustained in transit must be submitted to the

carrier.

If damage has occurred, contact your carrier within 48 hours of the delivery date. DO

NOT OPERATE DAMAGED EQUIPMENT. Retain all packing materials for future

shipment.

ELECTRICAL REQUIREMENTS

The Ultrasonic Processor requires a fused, single phase 3-terminal grounding type

electrical outlet. For power requirements, check the label on the back of the unit.

INSTALLING THE ULTRASONIC PROCESSOR

The Ultrasonic Processor should be installed in an area that is free from excessive

dust, dirt, explosive and corrosive fumes, and extremes of temperature and humidity.

If processing flammable liquids, use an approved fume hood and do not place the

power supply in the fume hood.

When positioning the unit, be sure to leave adequate space behind the unit so that all

connections can be easily disconnected.

WARNING

For your personal safety, do not, under any

circumstances, defeat the grounding feature of the

power cord by removing the grounding prong.

1 2 3 4 5 6 7 8 9 10 11 ... 30 31

No comments

Sonics VCX750 User Manual Page 6